Old Man Mountain
   

Select Country:   ES | PT | IT | FR | DE | EU

Sherpa Rear MTB bicycle touring rack

Sherpa Rear is very versatile and is our most popular rear rack. The design works with most bicycles out there. These include frames with no eyelets, small rear triangles, disk brakes, rear suspension and through-axles 12x142 or 12x148/boost. And off course, with any wheel size. Oh, and let´s not forget there are also versions for Fat Bikes.

 

It is the best option if you want to carry load on your MTB or touring bike. Its stiffness and lightness does endorse it as the leading rack model on the planet.


There is only one Old Man Mountain Sherpa, but the Fit Kits with the mounting hardware vary depending on the original axle of your bike. There are axles with different lengths and different thread pitch. All our versions for 12 axles include a new axle that replaces the one your bike has installed. The Sherpa is compatible with a 29r, but it will also work with a 26" or 27.5" bike. There are version for bicycles with a cierre rapidoQR skewer and versions for bikes with a eje 12x142 12x axle. The mounting kits includes a new axle that substitutes the axel on your bike.


 

  For thru-axles Various options
Sherpa Rear Old Man Mountain Sherpa transportin trasero bicicleta MTB Old Man Mountain Sherpa transportin trasero bicicleta MTB


Specifications Sherpa Rear MTB:

-The Sherpa Rack Frame is designed for bikes with tire width of 3 inches or less.
-The rack tubing is 6063 welded aluminum. The main rack from is made of 1/2 (13 mm) diameter tubing for durability, and the top rails are 3/8 (10 mm) diameter to fit all panniers.
-The top deck measures 12.5″ x 5.5″ (317 mm x 140 mm.)
-The top deck includes a hole for mounting a reflector or a light.
-The extenders and the dropouts are manufactured from 6061 aluminum.
-The Rack Frame and Fit Kit are all powder coated matte black for finish and durability.
-Thru axles are precision machined from 7075 aluminum and hard anodized for rugged durability.
-Stainless steel mounting hardware.
-The strongest cargo rack that fits your bike right. Approved for loads up to 70 lbs (31.75 kgs).
-Lifetime warranty against manufacturer defects.
-All parts are made in the USA.
-Weight: Rack Frame 700gr
-Versions with a QR skewer Includes QR skewer,spacers, screws, washers, extenders and pucks to attach rack to frame. Include .
-Versions with 12x142/148 axle Includes a new axle, spacers, screws, washers, extenders and and pucks to attach rack to frame.Include .


Versions of Sherpa Rear for MTB bikes***

Based on the length and thread pitch of the original axle of your bike, you can identify the Fit Kit you will need for your bike. If you have questions, you can always contact us.

 

MTB BICYCLES WITH 12mm THRU-AXLES

Rear bicycle rack Sherpa Rear for MTB bicycles with a 12mm thru-axle.

Sherpa Rear 813, 265 Eur
Length 160, 167, or 172 mm | Thread pitch 1.0

 

Sherpa Rear 826, 265 Eur
Length 175 or 184 mm | Thread pitch 1.0

Sherpa Rear 810, 265 Eur
Length de 192 - 198 mm | Thread pitch 1.75


Sherpa Rear 811, 265 Eur
Length de 174 - 180 mm | Thread pitch 1.75
Brands and models that might use this configuration includes Cannondale Bad Habit, Trek hardtails.

Sherpa 814, 265 Eur
Length 172 - 178 mm | Thread pitch 1.5

 

MTB BIKES QR SKEWER

Rear bicycle rack Sherpa Rear for MTB bicycles with a standard QR skewer

 

Sherpa Rear QR, 255 Eur
Standard 135mm QR skewer

 

 


Important

Important to read

All the brands and models detailed above are compatible with our racks. However, every bike manufacturer can suddenly change the configuration of their bikes, from one year to another or on certain models. Old Man Mountain has no way of knowing how each of the thousands of bike models on the market is configured. Nevertheless, for the moment the list above is accurate (and will be updated over time if necessary).

Mounting

Everything included

All you need for mounting the rack to your bike is included. QR/axle, screws, pucks, extenders, spacers. The exact content depends of the version of rack you order. Some bikes requiere different sized clamps or extenders, these are sold separately.

Buy Now

Order our racks

We ship to many EU contries directly from Madrid (Spain). Depending on the destination country, you will receive your order in 3-9 days.

Exchange & Returns

Exchange your order

Didn´t fit your bike? You have 30 days to exchange your rack for another in order to solve the problem. Shipping cost are paid by the client.

Content of the Fit Kit

Old Man Mountain Pacik de anclaje eje pasante 12x142 12x148 boos

 

Sherpa Rear 810
Fit Kit 810 is for mounting an Old Man Mountain Sherpa on to the rear of a bike with a 12 mm thru axle.

-Thru Axle: 12 mm thru axle with 192 or 198 mm length and x 1.75 mm thread pitch.
-Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
-Pair of 14" extenders. Stabilize and level the rack.
-Pair of OMM Pucks. Allows for an upper attachment point for the rack.
-Clear protective tape
-Stainless steel mounting hardware.


Sherpa Rear 811
Fit Kit 811 is for mounting an Old Man Mountain Sherpa on to the rear of a bike with a 12 mm thru axle.

-Thru Axle: 12 mm thru axle with 174 or 180 mm length and x 1.75 mm thread pitch.
-Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
-Pair of 14" extenders. Stabilize and level the rack.
-Pair of OMM Pucks. Allows for an upper attachment point for the rack.
-Clear protective tape
-Stainless steel mounting hardware.

Sherpa Rear 813
Fit Kit 813 is for mounting an Old Man Mountain Sherpa on to the rear of a bike with a 12 mm thru axle.

-Thru Axle: 12 mm thru axle with 160, 167 or 172 mm length and x 1.00 mm thread pitch.
-Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
-Pair of 14" extenders. Stabilize and level the rack.
-Pair of OMM Pucks. Allows for an upper attachment point for the rack.
-Clear protective tape
-Stainless steel mounting hardware.

Sherpa Rear 814
Fit Kit 814 is for mounting an Old Man Mountain Sherpa on to the rear of a bike with a 12 mm thru axle.

-Thru Axle: 12 mm thru axle with 172 or 178 mm length and x 1.50 mm thread pitch.
-Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
-Pair of 14" extenders. Stabilize and level the rack.
-Pair of OMM Pucks. Allows for an upper attachment point for the rack.
-Clear protective tape
-Stainless steel mounting hardware.

Sherpa Rear 826
Fit Kit 826 is for mounting an Old Man Mountain Sherpa on to the rear of a bike with a 12 mm thru axle.

-Thru Axle: 12 mm thru axle with 175 to 184 mm length and x 1.00 mm thread pitch.
-Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
-Pair of 14" extenders. Stabilize and level the rack.
-Pair of OMM Pucks. Allows for an upper attachment point for the rack.
-Clear protective tape
-Stainless steel mounting hardware.

 

Sherpa Rear QR
Fit Kit QR is for mounting an Old Man Mountain Sherpa on to the rear of a bike with standar 135 mm QR skewer.

-QR Skewer that replaces the one mounted on your bike.
-Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
-Pair of 14" extenders. Stabilize and level the rack.
-Pair of OMM Pucks. Allows for an upper attachment point for the rack.
-Clear protective tape
-Stainless steel mounting hardware.

 

 

Examples

Examples of Sherpa Rear.

 

     
Sherpa Rear Old Man Mountain Sherpa portabultos Old Man Mountain Sherpa portabultos

 


Why should I buy an Old Man Mountain rack?Why should I buy an Old Man Mountain rack?

 

*** In theory, all the brands and models detailed below are compatible with our racks. However, every bike manufacturer can suddenly change the configuration of their bikes, from one year to another or on certain models. Old Man Mountain has no way of knowing how each of the thousands of bike models on the market is configured. Nevertheless, for the moment the list above is accurate (and will be updated over time if necessary).

LINKS


More than 400 pictures of examples of racks mounted on various bikes.

On Pinterest, we have uplodaded more than 400 pictures on 9 different Pin Boards in an effort to show you various examples of OMM racks mounted on different types of bicycles.


Pictures of Old Man Mountain racks>>
Pictures by users 1 >>

Pictures by users 2 >>
Pictures of Sherpa >>
Pictures of Pioneer >>
OMM for Fatbikes >>
Pictures of Ultimate Low Rider >>
OMM on eBikes >>
Sergio and Amelia with Carradice and Old Man Mountain >>


Watch video on youtube >>
Blog (Spanish) >>
FAQ (Spanish) >>

OMM University (Spanish)>>




 

Full Suspension

Our racks are compatible with full suspension bikes with with 26" 700 27.5 and 29" wheels. THe best option if you want to carry panniers on your bike..

Disc Brakes

OMM racks are compatible with disc brakes and 29" wheels. We solve your problem of carrying a load on your mountain bike.

12x142 Axles

Sherpa and Pioneer offer solutions for your 12x142 axle bike from most mayor brands. For example, Specialized, Cannondale, Trek, Canyon, Cube, Radon and Fat Bikes.

QR15

Sherpa Front QR15 is the front rack you need if you have a QR15 front fork from Fox or Rockshox. As you can see, you can carry load up front as well.